Configure interfaces as listed in the table above.

R1(config)# banner motd $ Authorized Users Only! $

Create a banner that warns anyone accessing the device that unauthorized access is prohibited.

Assign cisco as the VTY password and enable login.

Assign cisco as the console password and enable login.

Assign class as the privileged EXEC encrypted password.

Disable DNS lookup to prevent the router from attempting to translate incorrectly entered commands as though they were host names.

Step 3: Configure basic settings for the router. Step 2: Configure the PC-A network settings according to the Addressing Table.

Step 1: Cable the network as shown in the topology.Īttach the devices as shown in the topology and cable as necessary. In Part 1, you will set up the network topology and configure basic settings, such as the interface IP addresses, device access, and passwords on the router.

Ethernet cables as shown in the topology Ethernet cables as shown in the topology.

Console cables to configure the Cisco IOS devices via the console ports.

1 PC (Windows with a terminal emulation program, such as Tera Term).

1 Switch (Cisco 2960 with Cisco IOS Release 15.2(2) lanbasek9 image or comparable).

1 Router (Cisco 4221 with Cisco IOS XE Release 16.9.

You can download the latest version from a number of Internet sites. Tera Term should be installed on the PC prior to starting the lab. If you are unsure contact your instructor.Īnswers Note : Refer to the Answers Lab Manual for the procedures to initialize and reload devicesĪnswers Note : This lab uses Tera Term 4.103. Note : Ensure that the routers and switches have been erased and have no startup configurations. Refer to the Router Interface Summary T able at the end of the lab for the correct interface identifiers. Depending on the model and Cisco IOS version, the commands available and the output produced might vary from what is shown in th e labs. Other routers, switches, and Cisco IOS versions can be used. The switches used in the labs are Cisco Catalyst 2960s with Cisco IOS Release 1 5.2(2) (lanbasek9 image). Note : The router s used with CCNA hands-on lab s are Cisco 4221 with Cisco IOS XE Release 1 6.9.4 (universalk9 image).

Restore the missing router configuration from the backup configuration file.

Erase the router startup configuration file.

Use Tera Term to back up a router running-configuration file.

Terminal emulation software can be used to easily back up or restore a router or switch configuration file. It is a recommended best practice to maintain backup configuration files for routers and switches in the event that they need to be restored to a previous configuration. Part 3: Use a Backup Configuration File to Restore a Router and Switch Configuration Background / Scenario Part 2: Use Terminal Emulation Software to Create a Backup Configuration File

Teraterm log file